Every house posseses an electrical switchboard. It protects the electrical wiring system in your own home. As part of your home maintenance checks or when you are doing your next renovations, have a look within your switchboard. This is where the main power switch, and also a number of fuses, or circuit breakers are found. Each fuse or circuit breaker connects to a different area of wiring in your home. Somebody who is electrical fault accurse, the fuse will blow or circuit breaker will trip, cutting off the power preventing overloading or household fire. A circuit breaker might be switched back on, whereas each fuse blows it must be replaced with a new one.
Always turn off the principle power switch if you are changing a fuse as well as turning off all electrical appliances and light-weight switches that are connected to the blown fuse. Replace the fuse together with the correct current rating. Too much a current rating will cause excessive current circulate through the circuit. Overheating and possibly fire can occur.
If a fuse keeps blowing, get hold of one of the many licensed Auckland electricians. There might be hidden electrical problems that you will not have picked up. If possible, swap the little fuse with your switchboard with plug-in circuit breakers of the same rating, since these are safer to use , nor require replacing.
Find out what electrical switches and appliances the fuse or circuit breaker protects. Switchboards tend to be labelled for easy identification. In any other case, ask an electrician to do this for you personally. This can save you time in identifying a blown fuse or which circuit breaker to exchange off.
How to Replace a Fuse
Adopt these measures:
1. Turn off the main on / off switch at the switchboard.
2. Look inside the switchboard for a list of where each circuits with each fuse connects to.
3. If it’s not obvious which fuse has blown, inspect each fuse one-by-one.
4. Once you have found the blown fuse, turn off lights and unplug all appliances on that circuit.
Replace the fuse wire. Ensure you use the correct current rating fuse wire. The actual rating is generally indicated within the front of the fuse carrier.
Lighting circuits typically use 5 amp, and not greater than 10 amp fuse wire.
Socket outlets use 10 amp although not greater than 15 amp fuse wire.
Large appliances work with a larger size fuse.
Ensure that you cut off any excess fuse wire.
5. Position the fuse back in its slot and turnaround for the on the main power switch.
6. Should the fuse blows again, call a licensed electrician.
What to do if a Circuit Breaker Trips?
In case your power goes off because your circuit breaker has tripped abide by these steps:
1. Switch off lights and unplug all appliances on the faulty circuit.
2. Push the operating lever to the “on” position, or push within the button on the circuit breaker.
3. In the event the circuit breaker continues to trip, it’s get hold of one of the many licensed Auckland electricians.
For more information about fuses please visit our website.
0 comments:
Post a Comment